Wireless Radio Specification
- Dual Radio, 5GHz 802.11a/n/ac and
‧2.4GHz 802.11b/g/n
‧2.4GHz: Max 450Mbps
‧5GHz: Max 1300Mbps
‧Dual concurrent radio support
- Transmit Power (Maximum Value)
‧2.4GHz: Max 29dBm
‧5GHz: Max 27dBm
‧Maximum power is limited by regulatory power
- Supported radio technologies:
‧802.11b: Direct-sequence spread-spectrum(DSSS)
‧802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
‧802.11n/ac: 3x3 MIMO with 3 streams
‧802.11ac with 20/40/80 MHz channel width
‧802.11n with 20/40 MHz channel width
‧802.11a/b/g with 20 MHz channel width
- Supported modulation types:
‧802.11b: BPSK, QPSK, CCK
‧802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
‧802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Supported data rates (Mbps):
‧802.11b: 1, 2, 5.5, 11
‧802.11a/g: 6, 9, 12, 18, 36, 48, 54
‧802.11n: 6.5 to 450 (MCS0 to MCS15)
‧802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS=1 to 3)
Power
- Power Source:
‧802.3af/at compliant source
‧Active Ethernet (Power over Ethernet, PoE)
Antennas
- Six detachable high gain antennas:
‧Three detachable 5dBi 2.4GHz antennas
‧Three detachable 7dBi 5GHz antennas
- Omni-Directional type:
‧Provide the optimal coverage
- Compliant with N type connector
Interface
- Two 10/100/1000 BASE-T Ethernet Port:
‧One Port (LAN1) supports 802.3af/at PoE input
‧One Port (LAN2) supports 802.3af PSE output
‧LAN2 can provide the power when using 802.3at PoE input instead of proprietary input
- Reset button in the PoE injector
Mechanical & Environment
- Dimensions / Weight:
‧285mm (L) x 218mm (W) x 55.5mm (H)
‧1890g (Unit, without mounting kit and antennas)
- Operating:
‧Temperature: -20°C~70°C
‧Humidity: 0%~90% typical
- Storage:
‧Temperature: -30°C~80°C
- Surge Protection: 20KV (Certificated standard is 8KV)
- ESD Protection: 6KV (Certificated standard is 1KV)
- Harsh Environment Use:
‧IP68 rated
Operation Mode
- Access Point / Client Bridge / WDS:
‧A variety of operation modes to serve multiple constituencies and applications.
|
Easy to Management
- Auto Channel Selection
‧Setting varies by Regulatory Domains
- SSIDs:
‧BSSID support
‧16 SSIDs support
‧Support 8 SSIDs on both 2.4GHz and 5GHz bands
- VLAN Tag:
‧Independent VLAN setting can be enable or disable
‧Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
- VLAN Pass-through:
‧VLAN pass through over WDS bridge
- SNMP &MIB:
‧v1/v2c/v3 support
‧MIB I/II, Private MIB
- Save Configuration as Default:
‧Saves the customized configuration as default value for different customer demands.
- Clients Traffic Status:
‧Reports the various main information timely which is required by administrator
- Guest Network:
‧Allows the administrator to manage easily grant “visitor” access within the network.
- E-mail Alert:
‧Provides a network monitoring tool for administrators to stay informed the configuration change.
- QoS:
‧Complaint with IEEE 802.11e standard
- RADIUS Accounting:
‧Help operators to offload 3G to the wi-fi seamlessly
Effective Control and Use
- CLI Comments Support:
‧Setting varies by Regulatory Domains
- Supported radio technologies:
- Distance Control (Ack Timeout)
- Multicast Supported
- Wi-fi Scheduler
‧Set the schedule for rebooting the device
- Band Steering
‧Shift the clients from 2.4GHz band to 5GHz band when the clients contest in 2.4GHz band
- Fast Roaming
‧Minimize perceptible delay during re-association.
- Fast handover
‧Traffic shaping regulates the flow of packets leaving an interface to deliver improvided Quality of Service (QoS)
Reinforcement Security
- WEP Encryption-64/128/152 bit
- WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
- Hide SSID in beacons
- MAC address filtering:
‧Filter up to 50 MACs
- Wireless STA (Client) connection list:
‧Reports the various main information timely which is required by administrator
- Https:
‧Widely used communications approach for securing communication over a computer network.
- SSH:
‧Provide confidentiality and integrity of data over an unsecured network, such as the Internet.
|